Skip to content
3 Effective Ways to Restore Cell Phone Holder Adhesion

3 Effective Ways to Restore Cell Phone Holder Adhesion

Car cell phone holders are modern driving gadgets that ensure we can use our phones safely while driving. However, these handy gadgets sometimes lose their crucial stickiness, making it impossible to use them properly. In this blog, we'll look at why car phone mounts lose their stickiness, how to fix the problem, and how to properly care for them to extend their life.


3 Effective Ways to Restore Cell Phone Holder Adhesion

Reasons why car phone mounts lose their stickiness


Temperature effect: the effect of ambient temperature on the adhesive material


  • High temperature environment: Under high temperature conditions, the adhesive material may become soft and lose its original adhesive force. This is especially common in summer or when exposed to direct sunlight for long periods of time.


  • Cold environments: Cold temperatures may cause adhesive materials to harden, reducing their flexibility and ability to adhere. This is more pronounced in winter or extremely cold conditions.


  • Temperature fluctuations: Frequent temperature changes can cause long-term damage to adhesive materials, reducing their durability.


Dust and grease: daily accumulation affects adhesion


  • Dust accumulation: Over time, dust particles can build up on adhesive surfaces, preventing them from coming into contact with other surfaces.


  • Grease Influence: Finger and airborne grease can form a film on sticky surfaces, significantly reducing adhesion.


  • Importance of Cleaning: This emphasizes the importance of regular cleaning of the holder to maintain its adhesion.


Material Aging: The effect of time on adhesion


  • Chemical Aging: Over time, adhesive materials may undergo chemical changes that result in decreased adhesion.


  • UV Exposure: Prolonged exposure to UV rays from sunlight can accelerate the aging process of materials, especially for some plastics and adhesive materials.


  • Natural wear and tear: frequent use and environmental factors can also lead to gradual wear and tear of the adhesive material, which in turn leads to loss of adhesion.



How to make your phone car holder stick again


Cleaning tips: use warm water and soap to clean properly


Prepare cleaning supplies: Prepare warm water, mild soap (such as hand sanitizer or dishwashing liquid) and a soft cloth.


Cleaning Steps:


  • Add a small amount of soap to warm water and mix thoroughly.


  • Use a soft cloth dipped in this soapy water to gently scrub sticky surfaces.


  • Be careful not to scrub too hard as this may damage the sticky layer.


RINSE CLEAN: Rinse the soap with water and gently wipe dry with a dry cloth or air dry naturally.


Using Adhesion Enhancers


Choose the right adhesive enhancer: there are various adhesive enhancers in the market, choose the one that suits the material of your cell phone holder.


Proper application method:


Follow the product instructions, usually just apply a thin layer to the sticky surface.

Wait for the enhancer to dry before applying.


Safety Tip: Use in a well-ventilated environment and avoid inhaling chemical gases.


Homemade Adhesive Repair Programs


Granulated Sugar Water Solution:


  • Dissolve a small spoonful of granulated sugar in a cup of warm water.


  • Gently rub the sticky surface with this solution and let it dry naturally.


Note: This is a temporary solution and may not be as stable as professional products.


Lemon Juice Method:


  • Apply lemon juice directly to the sticky surface.


  • Wait a few minutes, then wipe with a damp cloth.


  • Allow to dry naturally.


Note: The acidic nature of lemon juice may be corrosive to some materials, so test on a small area first.


With the above methods, you can effectively restore the stickiness of your car cell phone holder. Keep in mind that regular cleaning and proper maintenance are the keys to maintaining adhesion. These simple steps can greatly extend the life of your cell phone holder.


Proper Maintenance of Car Cell Phone Holder for Extended Use


Regular Cleaning: Maintaining Optimal Adhesion


Importance of Regular Cleaning: regular cleaning of your cell phone holder is essential to maintain adhesion.


Cleaning Steps:

  • Use a mild soap and warm water solution.


  • Gently wipe the sticky part with a soft cloth, avoid using abrasive cleaning tools.


  • After cleaning, rinse with water and air dry naturally.


AVOID HARMFUL CHEMICALS: Never use cleaners that contain strong chemicals, these may damage the sticky material.


Proper Installation: Key to Maintaining Adhesion


Avoid exposing the mount to extreme temperatures and direct sunlight for long periods of time. Therefore when mounting the car phone holder in your car, try to avoid strong sunlight, which can prevent the material from deteriorating and the adhesion from decreasing.


Protect the sticky surface:


When not in use, you can use protective film or clean cloth to cover the sticky surface to prevent the accumulation of dust and impurities.


Tips for use: prolonging service life


Correct use:


  • Follow the instructions to install and uninstall the cell phone holder correctly.


  • Avoid applying too much force on the holder, especially when installing and removing the cell phone.


Avoid common mistakes:


  • Do not place excessively heavy items on the mount, which can overstretch the adhesive material.


  • Avoid using the holder in wet or greasy environments, which may reduce adhesion.


Regular Inspection:


  • Regularly inspect the sticky part of the stand for signs of wear or damage.


  • Once you notice a decrease in adhesion, take prompt action to repair it.


By following these simple but effective maintenance and usage tips, your car cell phone holder will maintain its functionality and reliability for a longer period of time, ensuring convenience and safety while driving.




Properly maintaining and repairing the adhesion of your car cell phone holder is crucial to maintaining its functionality. By following the above tips, you can extend the life of your mount and keep it performing at its best.


In this article, we explore in detail the causes of loss of adhesion in car cell phone mounts, provide effective fixes, and how to prolong their life with proper maintenance. These tips will help you maximize the use of your car phone holder to ensure safety and convenience while driving.

We would also like to recommend Syncwire's car phone mounts, which have been upgraded with an adhesive in their car mounts to make them more stable and reliable. You can check out this powerful adhesive car mount, the Syncwire Universal Dashboard/Tesla Screen Phone Holder, which not only provides extremely strong adhesion to minimize the possibility of falling, but also gives you a 3-year warranty if anything goes wrong.

Choosing the right car phone holder is not just about convenience, it's an investment in safety. Whichever mount you choose, remember to perform regular maintenance and inspections to ensure continued optimal performance.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping